Co-axial-LAN converter with PoE

  • PoE Ready
  • Use over long distances
  • High speed transmission up to 2000m
  • No set up required

The BY-HPE11KTis a co-axial-LAN converter, enabling long distance transmission of IP signal over existing coax infrastructure.

PoE ready - the converter is compliant with PoE standards and can be used to power Panasonic IP cameras, eliminating the need for power outlet at the point of camera installation.

The converter can be used across long distance and ensure cost saving and use of existing infrastructure, ensuring a smooth transition to an IP system. The converter can run up to 500m with PoE and 2km for data at high speeds of up to 45Mbps

The converter is also easy set, simply connect the coax to the converter.

Product
Image Data
CAD Data

Service and Support

Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.

General service & downloads Contact technical support

Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.

General service & downloads Contact technical support

There are currently no key services available.

Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.

General service & downloads Contact technical support

There are currently no other services available.

Specifications

Transmission Rate 10 Mbps/100 Mbps (Auto-Sensing)
Protocol TCP/IP/UDP
Number of Ports 1 (RJ-45 connector)
Web Browser Internet Explorer® 6.0, 7.0, 8.0 or later
Operating Environment (Center Adaptor) Temperature: 0 °C (32 °F) to 50 °C (122 °F) Humidity: 20 %–85 % (no condensation)
Interfaces (Center Adaptor) 10Base-T/100Base-TX x 1 AUTO MDI/MDI-X AC inlet BNC connector
Dimensions (W x H x D) (Center Adaptor) About 105 mm x 44 mm x 210 mm (4 1/8 inches x 1 3/4 inches x 8 1/4 inches) (main body only)
Mass (Weight) (Center Adaptor) About 570 g (1.26 lb)
Power Supply (Center Adaptor) AC 100–240 V 50/60 Hz
Power Consumption (Center Adaptor) Maximum about 28 W (including the power consumption of the camera adaptor)
Coaxial Cable Power Supply Capability Maximum 22 W
Operating Environment (Camera Adaptor) Temperature: -10 °C (14 °F) to 50 °C (122 °F) Humidity: 20 %–90 % (no condensation)
Interfaces (Camera Adaptor) 10Base-T/100Base-TX x 1 AUTO MDI/MDI-X (PoE compatible) BNC connector
Dimensions (W x H x D) (Camera Adaptor) About 80 mm x 115 mm x 35 mm (3 1/8 inches x 4 1/2 inches x 1 3/8 inches) (main unit only)
Mass (Weight) (Camera Adaptor) About 165 g (0.36 lb)
Power Supply (Camera Adaptor) Original power system (DC 55 V from the center adaptor via the coaxial cable)
Power Consumption (Camera Adaptor) Included in the center adaptor’s power consumption
PoE Power Supply Capability Maximum 15.4 W
Standard (LAN Interface) IEEE802.3/IEEE802.3u (10Base-T/100Base-TX)
MDI/MDI-X Cross/Straight cable automatic recognition
Access Method (LAN Interface) CSMA/CD
Number of adaptors that can be communicated with 1 camera adaptor can be connected via coaxial cable for each center adaptor
Connectable Devices Center adaptor: devices equipped with 10Base-T/100Base-TX interfaces Camera adaptor: Panasonic network cameras
Number of Devices that can be Connected A maximum of 256 center adaptors or camera adaptors can be connected in 1 segment
Compatible Operating Systems Microsoft® Windows® XP, Windows Vista®, Windows® 7
Transmission Speed (UDP) 45 Mbps or higher (when using an RG-6/U coaxial cable at distances under 2 km [6,561 feet 8 inches])
Transmission Speed (TCP) 35 Mbps or higher (when using an RG-6/U coaxial cable at distances under 2 km [6,561 feet 8 inches])
Maximum Transmission Distance Without PoE function: 2 km (6,561 feet 8 inches) Distance With PoE function: 500 m (1,640 feet 5 inches) (when using a Panasonic network camera) / 300 m (984 feet 3 inches) (when using a Class0 standard network camera)