Main product image
BACK TO PRODUCT CATEGORY
WJ-PC200
Key Features

Up to 4 network cameras

Power over Ethernet Plus (PoE+)

High-speed transmission

The coaxial - LAN converter can be used for distances of up to 300 m (984 feet) for PoE+ connections and 500 m (1,640 feet) for PoE connections, and 2.0 km (6,560 feet) for non-PoE+ connections. (When used with RG-6/U coaxial cable, and the loop resistance is below 4 Ω/100 m {328 feet} without additional joint parts.)

Two models are provided on the receiver side

WJ-PR204 - 4-channel
WJ-PR201 - 1-channel

Camera side

WJ-PC200

Up to 4 network cameras can be connected and used on a single receiver side unit.(WJ-PR204) and are Power over Ethernet Plus (PoE+) ready.
The coaxial - LAN converter is compliant with PoE+ standards (IEEE802.3at) and PoE+ cameras can be connected and used*1.

WJ-PR204/WJ-PR201/WJ-PC200  Easy migration from analog to IP system with existing coaxial cable

Coaxial-LAN Converter for CCTV Cameras Diagram

High-speed transmission

The coaxial - LAN converter is capable of transmission speeds of 35 Mbps or over for TCP*2, and 45 Mbps or over for UDP connections*2.
(When used with RG-6/U coaxial cable, and for distances under 2.0 km (6,560 feet) [PR201], 500 m (1,640 feet) [PR204]

No setup required

Connections can be established by simply connecting the coaxial cable to the coaxial - LAN converter.

 

*1 There are limitations on the combinations of the cameras to be connected, the type of power supply and transmission range to the receiver side units.
For more detail please see the operating instructions on our website
(https://security.panasonic.com/pss/security/support/info.html).

*2 Transmission speed is the speed of transmission between the receiver side unit and the camera side unit.
Values may vary depending on the condition of the coaxial cable (for example, as the cable deteriorates over time), network conditions, etc.

Show more

  • Brochures
Product
Image Data
Marketing
Spec Sheets
Brochures
Technical
Firmware
Release Notes
Operating Instructions

Service and Support
  • WJ-PC200 Product Image (png)
    WJ-PC200 Product Image (png)
    Coaxial - LAN Converter WJ-PC200 Product Image
    Mon, 01/10/2018 - 14:31
    Download png - 653 KB
  • Catalogue Vertical Solution No.2 Transportation
    Catalogue Vertical Solution No.2 Transportation
    No.5A-002D, 4th Edition, PDF data
    Tue, 20/03/2018 - 09:19
    Download pdf - 9.25 MB
    Catalogue Vertical Solution No.4 Logistics
    Catalogue Vertical Solution No.4 Logistics
    No.5A-004A, 1st Edition, PDF data
    Tue, 20/03/2018 - 09:19
    Download pdf - 4.59 MB
    Catalogue i-PRO EXTREME series (April 2019)
    Catalogue i-PRO EXTREME series (April 2019)
    Fri, 12/04/2019 - 11:59
    Download pdf - 15.84 MB

Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.

General service & downloads Contact technical support

Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.

General service & downloads Contact technical support

There are currently no key services available.

Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.

General service & downloads Contact technical support

There are currently no other services available.

Power Supply Original power system (from the receiver side unit via the coaxial cable
Mass (Approx.) 110 g (0.24 lbs)
Finish Main unit : PC/ABS Sail white BNC connector cover (1 ch) : ABS White
Operating Environment Temperature : -10 to 50 °C {+14 °F to +122 °F} Humidity : 10 % to 90 % (without condensation)
Dimensions (W x D x H) Main Body : 76 mm x 76 mm x 36 mm {3 inches x 3 inches x 1-7/16 inches} When a BNC connector cover is mounted : 76 mm x 156 mm x 36 mm {3 inches x 6-5/32 inches x 1-7/16 inches}
Interfaces 10Base-T/100Base-TX x 1 BNC connector x 1