Current language: Suomi

The World’s First* Ultra-Short-Throw Zoom Lens Fits Easily in Tight Exhibition Spaces

* As of February 2019. For 0.4:1 throw-ratio or less. According to internal research.

 

Superior Flexibility for Easy Installation

 

Conventional ultra-short-throw lenses demand accurate, time-consuming projector installation positioning with no margin for error. The ET-DLE020’s optical zoom, however, provides an installation margin of ±45 mm (±1.77˝) and easy image adjustment at a throw-ratio of 0.280:1, all with zero image offset. Combines with Panasonic laser projectors*1 to support Wide-range Vertical and Horizontal Lens-Shift, more than doubling movable shift area of comparable lenses, increasing installation flexibility, and expediting setup.

Superior Flexibility for Easy Installation

*1 Please refer to the specifications page to check projectors compatible with ET-DLE020.

*2 Value is for ceiling installations at WUXGA resolution. Lens-shift value will vary by model. Please see the Throw Distance Calculator for more information. For floor installations, up and right shift will be defined as a positive value. Down and left shift will be defined as a negative value.

Note: Graphic represents a 200-inch projection at WUXGA resolution.

 

>> Throw Distance Calculator

 

High Reliability for Continuous Operation

 

The ET-DLE020 features an aspherical all-glass lens that’s heat- and scratch-resistant. Durable construction enhances reliability for long-term use, and when combined with our dust-resistant laser projectors*, assures consistently brilliant images under continuous operation.

* Please refer to the specifications page to check projectors compatible with ET-DLE020.

On-Axis Rear Projection

 

The ET-DLE020’s straight mirrorless design makes screen-centered projector installation possible in rear-projection applications.

On Axis Rear Projection

Note: Hot spots may occur depending on the screen.

Zero Offset and Flexible Setup for Multi-Screen Projection

 

Install your Panasonic 1-Chip DLP™ laser projector on-ceiling and close to the wall for full top-to-bottom screen coverage with zero offset and minimal shadowing, even in low-ceiling applications. Zoom and wide-range V/H Lens Shift joins flexible edge-blending adjustment for multi-screen projection. 

Zero Offset Projection

Specifications

Lens type Ultra-Short-Throw Zoom Lens
F Value 2.0
Focal Length (f) 4.1-4.4 mm
Screen Size 100-400 inches
Throw ratio | WUXGA 0.280-0.299:1
Throw ratio | WXGA 0.294–0.314:1
Throw ratio | XGA 0.290–0.309:1
Lens-shift*1 | Vertical +50 % – -16 %
Lens-shift*1 | Horizontal +10 % – -20 %
Zoom Yes
Dimensions (W×H×D) 170 × 170 × 389 mm ( 6 11/16˝ x 6 11/16˝ x 15 13/32˝ )
Weight Approx. 3.2 kg (7.05 lbs)
Applicable projectors*2 PT-RCQ10 / PT-RCQ80 / PT-RZ120 / PT-RZ970 / PT-RW930 / PT-RX110 / PT-RZ870 / PT-RZ770 / PT-RW730 / PT-RZ660 / PT-RW620
Note *1 Value is for ceiling installations at WUXGA resolution. Lens-shift value will vary by model. Please see the Throw Distance Calculator for more information: https://panasonic.net/cns/projector/calculator/tdc/. For floor installations, up and right shift will be defined as a positive value. Downand left shift will be defined as a negative value. *2 Please use this product with the included lens-bracket attachment.