Key Features

Laser 1-Chip DLP, 5200 lumens ( centre), WUXGA

Excellent image quality and high contrast with laser light source

Maintenance free up to 20,000 hours with dust-resistant optical block and long lasting laser engine

Free 360 degrees installation

20,000:1 contrast ratio
  PT-RZ575 PT-RZ570

5,200 lm (centre)/
5,000 lm (ANSI)

5,400 lm (center)/
5,200 lumens

(1920 x 1200 pixels)

(1920 x 1200 pixels)


20,000:1 20,000:1


Solid Shine Laser Dependability, DLP™ Image Quality

Together with the latest 1-Chip DLP™ for detailed WUXGA resolution and new generation solid state laser diodes for high brightness the PT-RZ575 is a perfect projector for intensive usage and rear- projections for control rooms, surveillance centres, museums and exhibitions.

The quartet colour harmonizer wheel mechanism captures a wider colour space than comparable laser projectors, which allows white to be reproduced realistically on the screen. With conventional projectors it’s difficult to achieve an accurate white balance causing images to appear with a distracting greenish tint. Panasonic’s quartet colour harmonizer eliminates this negative impact by adding an additional yellow segment to the colour wheel to produce whites with unparalleled accuracy for natural and realistic picture quality.

Laser Module Maintains Picture Quality For Longer Use

Thanks to the long lasting dual solid state laser modules, there are no lamps which needs to be replaced. The image colours and brightness degrades very gradually in consistent, linear fashion. As well as reducing maintenance hassle, out-of-the-box picture quality preserves longer.

Dynamic light control delivers better contrast

The PT-RZ575 direcectly modulates laser power output to achieve a high contrast with low power consumption. A digitally controlled frame-by-frame scene-linking modulation ensures highly precise output adjustment, while the accurate 20.000:1 contrast ratio is delivered even when bright and dark scenes are frequently interchanging.

Deatil clarity processor 3 - Sharpness in the finest details

This unique Panasonic circuit optimizes the sharpness of each image based on the super high, high, medium and low frequency components of the extracted image information. The resulting images are expressed with natural and convincing realism.

Dust-resistant airtight optical block

The optical block of the PT-RZ575 is airtight, ensuring consistent, long-lasting image quality for up to 20.000 hours* without maintenance. The optical block design passed stringent testing to assure utmost realiability in environments with up to 0,15mg of particulate matter per cubic meter*2  . The structure prevents brightness degration from dust intrusion.

Long Life mode offers up to 10 years maintenance free

In environments where full grightness is not necessary, such as survaillance, control- and simulation-rooms, constatn operation modes extend light-source replacement up to 87.600 hours*2 in Long Life Mode 3 - about 10 years of 24/7 operation with consistent brightness and colour

Built-in Short-Throw Lens with Powered Focus and Lens Shift

The PT-RZ575 incorporates short-throw lens ideal for rear projection in dedicated rear-projection rigging boxes. Whit this lens, projection distance is approx. 1.2m to produce a 70-inch diagonal wide-screen image. Powered focus adjustment is done with remote controller, which is convienient for box installation. Furthermore, lens shift is also powered to shift images position vertically and horizontally.

Single-cable Digital Link control and video connection

Upward HDBaseT™ compatible Digital Link supports transmission of uncompressed Full HD video and control commands through a single CAT 5e or higher STP cable for distances of up to 150m. Add an optional Digital Link switcher (ET-YFB200) or Digital Interface Box (ET-YFB100) to further simplify installation in large venues while reducing cost and improving reliability at the same time.

Screen Adjustment for Specially Shaped Screens

Horizontal, vertical and corner keystone correction adjusts the image shape for clear visibility when projecting off-axis or from an unsual angle. Curved screen correction allows for the projection of natural and disortion-free images onto curved or cylindrical surfaces.

Edge Belnding and Colour Matching

Adjoining edges in a multi-screen system can be blended to create a smooth and seamless image. Slight cariations in the colour reproduction of individual projectors can be corrected in multi-screen applications.


Show more


Power Supply AC100 - 240V 50Hz/60Hz
Power Consumption 500W (520VA) NORMAL: 375W ECO: 350W SILENT: 350W LONG LIFE1: 220W LONG LIFE 2: 185W LONG LIFE 3: 160W SHUTTER: 40W *Operating Temperature: 25 °C (77 °F), Altitude: 700m (2,297ft), ICE627087: 2008 Broadcast contents, Picture mode: Standard, Dynamic contrast [ON] 0.5 W with STANDBY MODE set to ECO*1, 10 W with STANDBY MODE set to Normal (22 W with STANDBY MODE in AUDIO SETTING set to ON andQUICK STARTUP function disabled, 50 W with QUICK STARTUP function enabled)
BTU Value Max 1,706 BTU
Lens Fixed-Focus Lens (0.8:1), Auto focus, F 1.75, f 11.9 mm
Light Source Laser Diode Laser class 1 Luminance life for set: 20,000 hours at half luminance (NORMAL/SILENT)/ 24,000 hours at half luminance (Eco) * Temperature: 35°C (95°F), Altitude 700m (2,297ft), Dust: 0.15mg/m3 43,800 hours at constant luminance (LONG LIFE1) 61,320 hours at constant luminance (LONG LIFE2) 87,600 hours at constant luminance (LONG LIFE3)
Screen Size 1.02 - 7.62 m (40-300 inches)
Brightness*2 5,200 lumens (Center)*2/ 5,000 lumens*2 (NORMAL) 4,160 lumens (Center) / 4,000 lumens (ECO/SILENT) 2,200 lumens (Half luminance) / 1,600 lumens (Constant luminance) (LONG LIFE1) 1,700 lumens (Half luminance) / 1,300 lumens (Constant luminance) (LONG LIFE2) 1,300 lumens (Half luminance) / 1,000 lumens (Constant luminance) (LONG LIFE3)
Center-to-Corner Uniformity*2 90%
Contrast*2 20,000:1(full on/full off, dynamic contrast ON)
Resolution 1920 x 1200 pixels
Scanning Frequency | HDMI/DVI-D fH: 15- 100kHz, fV: 24 - 120Hz, dot clock: 25 - 162 MHz 525i (480i)*3, 625i (576i)*3, 525p (480p), 625p (576p), 750 (720)/60p, 750 (720)/50p, 1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/25p, 1125 (1080)/24p, 1125 (1080)/24sF, 1125 (1080)/30p, 1125 (1080)/60p, 1125 (1080)/50p, VGA (640 x 400) - WUXGA (1920 x 1200) compatible with non-interlaced signals only
Scanning Frequency | RGB fH: 15- 100kHz, fV: 24 - 120Hz, dot clock: 20 - 162 MHz
Scanning Frequency | YPBPR (YCBCR) 525i (480i): fH 15.75 kHz; fV 59.94 Hz, 625i (576i): fH 15.63 kHz; fV 50 Hz, 525p (480p): fH 31.50 kHz; fV 60 Hz, 625p (576p): fH 31.25 kHz; fV 50 Hz, 750 (720)/60p: fH 45.00 kHz; fV 60 Hz, 750 (720)/50p: fH 37.50 kHz; fV 50 Hz, 1125 (1080)/60i: fH 33.75 kHz; fV 60 Hz, 1125 (1080)/50i: fH 28.13 kHz; fV 50 Hz, 1125 (1080)/25p: fH 28.13 kHz; fV 25 Hz, 1125 (1080)/24p: fH 27.00 kHz; fV 24 Hz, 1125 (1080)/24sF: fH 27.00 kHz; fV 48 Hz, 1125 (1080)/30p: fH 33.75 kHz; fV 30 Hz, 1125 (1080)/60p: fH 67.50 kHz; fV 60 Hz, 1125 (1080)/50p: fH 56.25 kHz; fV 50 Hz
Scanning Frequency | Video/S-Video fH: 15.75 kHz, fV: 59.94 Hz [NTSC/NTSC4.43/PAL-M/PAL60] fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Optical Axis Shift Vertical: -4.4%, +4.4(powered) Horizontal: -2.1%, +2.1%(powered)
Installation Ceiling/ oor, front/rear, 360 degree free installation
Terminals | Computer 1 In D-sub HD 15-pin (female) x 1 R,G,B: 0.7 Vp-p, 75 ohms, (G: 1.0 Vp-p, 75 ohms for sync on G) HD/VD, SYNC: TTL, high impedance, positive/negative automatic Y, PB, PR Y: 1.0 Vp-p (including sync signal), PB/PR(CB/CR): 0.7 Vp-p, 75 ohms Y/C Y: 1.0 Vp-p (including sync signal), C: 0.286 Vp-p, 75 ohms
Terminals | Computer 2 In/1 Out D-sub HD 15-pin (female) x 1 R,G,B: 0.7 Vp-p, 75 ohms, (G: 1.0 Vp-p, 75 ohms for sync on G) HD/VD, SYNC: TTL, high impedance, positive/negative automatic Y, PB, PR Y: 1.0 Vp-p (including sync signal), PB/PR(CB/CR): 0.7 Vp-p, 75 ohms
Terminals | DVI-D In DVI-D 24-pin x 1, DVI 1.0 compliant, compatible with HDCP, for single link only
Terminals | HDMI In 1/HDMI In 2 HDMI 19-pin x2, Deep Color, compatible with HDCP, Audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz)
Terminals | Video In Pin jack x 1, 1.0 Vp-p, 75 ohms
Terminals | Audio In 1 Pin jack x 2(L-R) 0.5 Vrms, input impedance: 22 kilohms or more
Terminals | Audio In 2/Audio In 3 M3 (L, R) x 1, 0.5 Vrms, input impedance: 22 kilohms or more
Terminals | Variable Audio Out M3 x 1 (monitor out, stereo) 0-1.80 Vrms, variable, output impedance: 2.2 kilohms or less
Terminals | Serial In D-Sub 9 p x 1, for external control (RS-232C compliant)
Terminals | DIGITAL LINK/LAN RJ-45 x 1, for network, DIGITAL LINK connection (HDBaseT™ compatible), 100Base-TX,compatible with Art-Net, PJLink™ (class 1), Deep Color, HDCP
Terminals | LAN RJ-45 x 1 for network connection 10Base-T/100Base-TX, compatible with Art-Net, PJLink™
Terminals | DC Out USB Type A x 1, for power supply (DC5 V, max 900 mA)
Power Cord Length 3.0 m (9 ft 10 in)
Cabinet Materials Molded plastic
Dimensions (W x H x D) 498 x 168*4 x 481mm (19-19/32 x 6-5/8*4 x 18-15/16 in ) with supplied lens
Weight Approx. 16.6kg (36.6 lbs)
Operation Noise 28 dB (Silent), 33 dB (Normal/Eco)
Operating Temperature 0-45 °C (32-113 °F) *6
Operating Humidity 10%-80% (no condensation) at less than 4,200 m (13,780 ft.) above sea level
Storage Temperature -20°C-60°C (-4- 140 °F)
Storage Humidity 10%-80%
Note *1 When the STANDBY MODE is set to Eco, network functions such as power on over the LAN will not operate *2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards *3 Only compatible with dot clock frequency of 27 MHz (pixel repetition signal) *4 with legs at shortest position *5 Average value. May differ depending on models *6 The operating environment temperature should be between 0°C (32°F) and 40°C (104°F) if the projector is used at an altitude between 1,400m (4,593ft) and 4,200m (13,780ft) above sea level. When the OPERATING MODE is set to [ECO] or [SILENT], the projector cannot be used at an altitude of 2,700m (8,858ft) or higher above sea level.
DLP™ Chip | Panel Size 17.0 mm (0.67 in) diagonal (16:10 aspect ratio)
DLP™ Chip | Display Method DLP™ chip x 1, DLP™ system
DLP™ Chip | Pixels 2,304,000 (1920 x 1200) x 1, total of 2,304,000 pixels
Brightness 5,200 lumens (Center)/ 5,000 lumens
Technology 1-Chip DLP Laser