Compact 20000 lumens-class Projector Flagship model delivering spellbinding picture quality for events and staging
Compact 16.000lm*1Projector Delivers Stunning Picture Quality with High Frame-Rate*2
- 16.000lm*1 of Brightness with a contrast ratio of 10.000:1 from an extraordinarily compact body
- Real motion processor combines frame-creation and 120 Hz processing for fluid motion reproduction*2
- Providing a variety of advanced features, such as DIGITAL LINK connectivity and multi-screen projection
*1 17,000 lm for the PT-DW17K2, and 16,000 lm for the PT-DZ16K2, *2 Featured on the PT-DZ21K2/DS20K2/DZ16K2 only,
Benefits of PT-DZ16K2:
1. Ultra High and Detailed Images
- 16,000 lm of brightness (PT-DW17K2: 17,000 lm, PT-DZ16K2: 16,000 lm) for large venues.
- Real Motion Processor combines Frame-Creation and 120 Hz processing for fluid motion reproduction (PT-DZ21K2/DS20K2/DZ16K2).
- Next-generation Detail Clarity Processor delivers crisp and detailed image quality.
- High 10,000:1*1 contrast ratio with Dynamic Iris.
- System Daylight View 3 for enhanced color performance in bright rooms and mapping applications.
- Waveform Monitor function for easy adjustment of black/white level.
- DICOM Simulation mode for medical presentations and training*2.
2. High Reliability and Low TCO
- Extended lamp replacement cycle of 3,000 hours*3.
- Liquid cooling with highly efficient quad-lamp system reduces operational noise.
- Stable operation in ambient temperatures of up to 45 ° C*4.
- Quad-lamp system allows 24/7 operation in Lamp Relay mode.
- Easy lamp replacement from rear side.
- Eco filter requires no maintenance for 12,000 hours*5.
- Durable, precision-tuned optical engine.
- High efficiency lamps reduce power consumption.
3. Versatile Installation Flexibility
*1 Full on/off, with Dynamic Iris set to “3”, *2 This product is not a medical instrument. Do not use for actual medical diagnosis, *3 Usage environment affects lamp replacement cycle, *4 Operating temperature range is 0-40 °C (32-104 °F) when projector is used in Portrait mode or High Altitude mode for altitudes 1,400-2,700 m (4,593-8,858 ft).
Operating temperature range is 0-35 °C (32-95 °F) when projector used in Portrait mode in High Altitude mode, *5 Usage environment affects filter replacement cycle, *6 Installation is possible only with the terminal side facing downward. Horizontal rotation and vertical rotation are both limited to 15 °, Additionally, lamp life is reduced to 700 hours depending on usage environment.
|Brightness||16,000 lumens (four lamp)|
|Resolution||1,920 x 1,080 pixels (Input signals that exceed this resolution will be converted to 1,920 x 1,080 pixels.)|
|Lamp||432 W UHM lamps (x 4) (four lamp system)|
|Power Supply||200 - 240 V AC, 12 A, 50/60 Hz (3-wire single-phase)|
|Power Consumption||2,060 W (2,100 VA) (0.3 W with STANDBY MODE set to ECO. 9 W with STANDBY MODE set to NORMAL.), max. 7,031 BTU (without light output: 6,758 BTU )|
|DLP™ Chip | Panel Size||24.1 mm (0.95 inches) diagonal (16:9 aspect ratio)|
|DLP™ Chip | Display Method||DLP™ chip x 3 (R, G, B), DLP™ projection system|
|DLP™ Chip | Pixels||2,073,600 (1,920 x 1,080) x 3, total of 6,220,800 pixels|
|Lens||Optional powered zoom/focus lenses|
|Screen Size||1.78-25.4 m (70-1,000 inches) (1.78-15.24 m (70-600 inches) with the ET-D75LE8 tele), (1.78-7.62 m(70 - 300 inches) with the ET-D75LE5, 16:9 aspect ratio|
|Contrast||10,000:1 (full on/full off, in dynamic iris 3 mode)|
|Scanning Frequency | SDI||3G-SDI signal (YPBPR 4:2:2 10-bit): SMPTE ST 424 compliant: 1080/50p, 1080/60p, (RGB4:4:4 12bit/10bit): SMPTE ST 424 compliant: 1080/50i, 1080/60i, 1080/25p, 1080/24p 1080/24sF, 1080/30p Single-link HD-SDI signal (YPBPR 4:2:2 10-bit): SMPTE ST 292 compliant: 720/50p, 720/60p, 1035/60i, 1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p SD-SDI signal (YCBCR 4:2:2 10-bit): SMPTE ST 259 compliant: 480i, 576i|
|Scanning Frequency | HDMI/DVI-D/DIGITAL LINK/RGB||Horizontal: 15-100 kHz, vertical: 24-120 Hz, dot clock: 162MHz or less HDMI/DVI-D : 25 MHz-162MHz)|
|Scanning Frequency | YPBPR (YCBCR)||480i (525i): fH 15.73 kHz; fV 59.94 Hz, 576i (625i): fH 15.63 kHz; fV 50 Hz, 480p (525p): fH 31.47 kHz; fV 59.94 Hz, 576p (625p): fH 31.25 kHz; fV 50 Hz, 720 (750)/60p: fH 45.00 kHz; fV 60 Hz, 720 (750)/50p: fH 37.50 kHz; fV 50 Hz, 1035/60i: fH 33.75 kHz; fV 60 Hz, 1080 (1125)/60i: fH 33.75 kHz; fV 60 Hz, 1080 (1125)/50i: fH 28.13 kHz; fV 50 Hz, 1080/25p: fH 28.13 kHz; fV 25 Hz, 1080/24p: fH 27.00 kHz; fV 24 Hz, 1080/24sF: fH 27.00 kHz; fV 48 Hz, 1080/30p: fH 33.75 kHz; fV 30 Hz, 1080/60p: fH 67.50 kHz; fV 60 Hz, 1080/50p: fH 56.25 kHz; fV 50 Hz|
|Scanning Frequency | Video/Y/C||fH: 15.73 kHz, fV: 59.94 Hz [NTSC/NTSC4.43/PAL-M/PAL60] fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]|
|Optical Axis Shift | Vertical||±60% (±50% with the ET-D75LE6, +75-+88% with the ET-D75LE90) from center of screen, powered|
|Optical Axis Shift | Horizontal||±20% (±15% with the ET-D75LE6, -12-+14% with the ET-D75LE90) from center of screen, powered NOTE: Optical axis shift function cannot be operated when used with the ET-D75LE50.|
|Keystone Correction Range||Vertical : ±40° (±22° with the ET-D75LE50, ±28° with the ET-D75LE6, +5° with the ET-D75LE90), horizontal: ±15°|
|Terminals | SDI In||BNC x 1, 3G-SDI signal: SMPTE ST 424 compliant Dual-link HD-SDI signal: SMPTE ST 292 compliant SD-SDI signal: SMPTE ST 259 compliant|
|Terminals | HDMI In||HDMI 19-pin x 1, Deep Color, compatible with HDCP|
|Terminals | DVI-D In||DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible, for single l ink only|
|Terminals | DIGITAL LINK/LAN||RJ-45 Network connection / digital link connection (video/network/serial control) compliant with PJLink,100base-tx, Art-Net compatible Deep Color, compatible with HDCP|
|Terminals | RGB 1 In||BNC x 5|
|Terminals | RGB 1 In | R, G, B||R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative a utomatic NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.|
|Terminals | RGB 1 In | Y, PB, PR (Y, CB, CR)||Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms|
|Terminals | RGB 1 In | S-Video Signal||Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms|
|Terminals | RGB 2 In||D-sub HD 15-pin (female) x 1|
|Terminals | RGB 2 In | R, G, B||R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative a utomatic NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.|
|Terminals | RGB 2 In | Y, PB, PR (Y, CB, CR)||Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms|
|Terminals | Serial In||D-sub 9-pin (female) x 1 for external control (RS-232C compliant)|
|Terminals | Serial Out||D-sub 9-pin (male) x 1 for link control|
|Terminals | Remoter 1 In||M3 jack x 1 for wired remote control|
|Terminals | Remoter 1 Out||M3 jack x 1 for link control|
|Terminals | Remoter 2 In||D-sub 9-pin (female) x 1 for external c ontrol (parallel)|
|Power Cord Length||3.0 m (9 ft 10 in)|
|Cabinet Materials||Molded plastic|
|Dimensions (W x H x D)||620 x 291 x 800 mm (24-7/16 x 11-15/32 x 31-1/2 inches) (without lens)|
|Weight||Approx. 41 kg (90.4 lbs) (without lens)|
|Operating Noise||46 dB (quad lamp operation)|
|Operating Temperature||0°- 45°C (32°- 113°F)|
|Operating Humidity||10%-80% (no condensation)|